My Blog
Show MenuHide Menu

Linksys Router: How to Return to Default Factory Setting?

February 28, 2014

Linksys router is one of the popular network device you can find at home or office. The most common one is the wireless router which needs to have a good security to avoid unwanted access. Resetting your router to its default setting so you can strengthen the security can be done in two ways. You can find them here and pick what you can easily do:

Reset Button Stepsimagw

  1.  Make sure that your router is plugin and linked to the electrical power. Go through the back and bottom part in the router and look for the “Reset” key. The button is notable for its purpose and recessed along with a small hole to avoid accidents of resetting it.
  2. You may use a straightened out paper clip or any sharp things and hold the Reset button up until the power light will start blinking. The procedure will be performed in 10 seconds and for older modems could take 30 seconds.
  3. And then, put out the button and hold off until the light will minimize from blinking. When the light fails to stop from flashing after 60 seconds of removing it, you’ll have to move forward quickly to another step.
  4. Remove the wireless router with the electric power cable for approximately 30 seconds and then plug it back. A new product of Linksys routers will never actually need this action however it won’t lead to a problem for try. Your router presently has now been totally reset to its default factory setting up and prepared for a new configuration.

Resetting Computer Steps

  1. Only type in your browser IP. Type in the username and password you could have generated. When you never ever set, just allow the username blank and type in “admin” on password area.
  2.  Go to “Administration” tab after which, just go for “Factory Defaults” on the sub-tab.
  3. Conclusively, click the “Restore Factory Defaults” button and also your router will reset.

Leave a Reply

Your email address will not be published. Required fields are marked *